Vilene - Fuse 'n Tear White Stabiliser 90cm | F322

Vilene (now Vlieselene) - Fuse 'n Tear White Stabiliser 90cm 

It is a temporary iron on, tear away embroidery backer. Non-woven, can be ironed on to the fabric back to stabilise and support it, avoiding embroidery puckering.

It has a medium, soft handle and is suitable for all fabrics including stretchy fabrics. It can also be printed on using an ink jet printer.

Use med to hot heat iron on small sections mat a time for approx 8 seconds, do not push the iron but gently press as you go.   

After embroidery simply tear away excess Fuse 'n Tear from around your design. 

90cm wide 

80% Cellulose, 20% Polyester 

Sold by the half metre (50cm x 90cm wide).

Fabric will be sent as one continuous piece if more than half meter is purchased.